Contact Us
TEL: +86-020-31105688
E-mail: info@jrdiamondtools.com
Address: Building C28, Huachuang Industrial Park, Jinshan Avenue, Shiji Town, Panyu, Guangzhou 511450, China
Coated Diamond Electroplated Grinding Mandrels (Carbide Shank)

Coated Diamond Electroplated Grinding Mandrels (Carbide Shank)

Application: used on carbide, ceramics, glass and reinforced plastics. Electroplated diamond mandrels are designed to grind carbide, ceramic, quartz, fiberglass and other composite materials. Made with carbide shanks

  • Features & Specification

    Electroplated diamond mandrels are designed to grind carbide, ceramic, quartz, fiberglass and other composite materials. Made with carbide shanks.


    Dimension:

    D

    T

    N

    L

    B

    0.3

    2

    3

    35

    3

    0.4

    2

    3.5

    35

    3

    0.5

    2

    3.5

    35

    3

    0.6

    2

    6

    35

    3

    0.7

    2

    7

    35

    3

    0.8

    3

    7

    35

    3

    0.9

    3

    7

    35

    3

    1.0

    3

    7

    45

    3

    1.1

    3

    7

    45

    3

    1.2

    3

    12

    45

    3

    1.4

    3

    12

    45

    3

    1.5

    3

    13

    45

    3

    1.6

    4

    13

    45

    3

    1.7

    4

    13

    45

    3

    1.8

    4

    13

    45

    3

    1.9

    4

    13

    45

    3

    2.0

    4/5

    13

    45

    3

    2.1

    4

    20

    45

    3

    2.2

    4

    13

    45

    3

    2.3

    4

    13

    45

    3

    2.4

    4

    13

    45

    3

    2.5

    5

    25

    45

    3

    2.6

    4

    13

    45

    3

    2.7

    4

    13

    45

    3

    2.8

    4

    13

    45

    3

    2.9

    4

    13

    45

    3

    3.0

    5

    25

    45

    3

    Other size can be customized, if you have the drawing of diamond grinding mandrels, can provide us for quotation.






    Application: diamond plated mandrels are used on carbide, ceramics, glass and reinforced plastics. 

    Recommended Use: Low grinding wheel speed is one of the major causes of poor performance in superabrasives tools like Diamond or CBN. Wheel loading and heat build-up are common signs of low RPM.  The recommended speed for electroplated diamond internal grinding wheel is 2100 to 3600 m/min and for electroplated CBN grinding wheel is 3600 to 6000 m/min. The recommended feed varies from 0.005mm to 0.05mm depending on the ground material. Coolant should be used wherever possible, but can be used dry successfully.

     

    Grit Size: Available in D or B91 (#170/200), D or B126 (#120/140), D or B181 (#80/100). Other grit sizes are available upon request.

     

    Shank material: hardened steel (standard), Hard metal (special type)

    谷歌详情(1).jpg


Related Products
Inquiry