Contact Us
TEL: +86-020-31105688
Address: Building C28, Huachuang Industrial Park, Jinshan Avenue, Shiji Town, Panyu, Guangzhou 511450, China
Home > News > Content
The Shortcomings Of The Traditional Processing Methods Of Grinding Wheels
Nov 02, 2018

After the grinding wheel is subjected to calcination and solidification, the size, shape and positional accuracy of each surface are not up to the technical requirements of use, and must be turned, ground and ground. The unit using the grinding wheel is also indispensable for the production and the specifications of the grinding wheel, and it must be turned. Due to objective technical reasons, most of the domestic and foreign countries use traditional knife bowls for turning. In the process of processing it, the grinding wheel drives the quenched 45th steel thin-walled knife bowl to rotate at a higher linear velocity (300-400 m/min), and carries the cutter to remove the excess amount of the diamond grinding wheel. Due to the high-speed rotation of the processed grinding wheel and the knife bowl, the dust and noise in the processing are large, the cutting depth and the feed amount are small, so the processing efficiency is low and the comprehensive cost is high, and the operator is labor intensive. If a large-grain diamond cutter is used, it is expensive, and because the diamond has low bending strength, it is easily damaged during cutting, and the cutting depth and the feed amount when cutting the grinding wheel are small, and it is generally used only in finishing.

JR company specializes in diamond and CBN tools, including resin bond, vitrified bond, metal bond and electroplated grinding wheel.

Please welcome to know more